Canon imagePRESS C1+ User Manual page 73

4
Load the paper stack into the paper drawer .
Even out the edges of the paper stack. Load the paper stack against the right wall of the paper drawer.
When loading paper into the paper drawer for the first time, set the paper size slide to match the paper
size being loaded. (See "Adjusting a Paper Drawer to Hold a Different Paper Size, " in the Reference Guide .)
When loading paper into the paper drawer, make sure that the paper size setting is the same size of the
paper that is being loaded.
•
Paper which has been rolled or curled must be straightened out prior to use.
•
Make sure that the height of the paper stack does not exceed the loading limit mark (
paper drawer.
•
Each paper drawer holds approximately 550 sheets of paper (80g/m²).
•
If there are instructions on the package of paper about which side of the paper to load, follow those
instructions.
•
When the paper is loaded into the paper drawer, the side facing down is the one printed on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it.
•
For more information on the print direction of preprinted paper (paper which has logos or patterns already
printed on it), see Chapter 9, "Appendix, " in the Reference Guide.
) at the back of the
2-5
Loading Paper
2