Shutting Down The Machine - Canon imagePRESS C1+ User Manual

Shutting Down the Machine

If there are any jobs currently being processed, or a MEAP application is running when the Shutdown
mode is activated, the machine asks you to confirm and cancel any existing jobs, and then access
to the hard disk is restricted. This procedure protects the hard disk from access errors the next time
the machine is turned ON. When the machine shuts down, it also performs an internal cooling down
process, which enables the machine to be shut down safely. Follow the instructions below to safely
shutdown the machine.
1
•
If you turn the main power of the machine OFF without following the procedure below, copies that are output the
next time the machine is turned ON may not be printed correctly. In this case, printing will return to normal after a
certain number of copies are output.
•
Do not initiate the Shutdown mode during fonts are being downloaded.
1
1-26
Main Power
Press and hold the control panel power switch for more than three seconds .
If the machine is in the Sleep mode, press the control panel power switch one time to cancel the Sleep
mode, and then press and hold the control panel power switch again for more than three seconds.
The job confirmation screen is displayed.
Do not initiate the Shutdown mode during fonts are being downloaded.
•
You can also force the machine into the Shutdown mode by pressing
Settings] → [Shutdown Mode].
•
You cannot force the machine into the Shutdown mode in the following cases:
- When the machine is receiving and updating device information
- When the machine is importing or exporting data using the Remote UI function
•
In a rare instance, the machine may not go into the Shutdown mode even if you press and hold the control
panel power switch for more than three seconds. In this case, follow the instructions on the touch panel
display to turn OFF the main power.
(Additional Functions) → [Common