Completion Of Operation - NUVE NB 5 User Manual

In order to display the set values during the operation, push the encoder button once. The
values set on the temperature display and the time display of the device will appear for 5
seconds.

During the operation of the program, the time starts to count up after the instrument
has reached to the set temperature

6.3 COMPLETION OF OPERATION

 Ensure that the program is over (See "End" and "End of the program lamp").
 Take the samples out at the end of the operation.
 Take precautions while handling the samples after the operation as they can be hot.
 Remove the undesirable effects occurred during the operation after the tank has been
completely emptied.
 You may leave the bath at stand-by or switch it off.
 Operating records are transferred to the usb port attached a USB memory.
Check the liquid level in the tank during long operations and refill to the max line if
necessary.
The usb led and the data transfer led on the control panel turn on during transfer of data
in memory and the transfer process starts automatically. Do not remove external memory
from usb port without the data transfer led turn off and the audible alarm finished.
Records are transferred to external memory when external memory is connected to the
Usb port.
17