Table of Contents
Advertisement
PG36NG-6/PG36LP-6
installation
Conversion From NG To Propane Kit #517-968
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER,
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER IF IN DOUBT DO NOT DO THIS CONVERSION!!
Propane Conversion Kit Contains:
Qty.
Part #
Description
1
904-390
Burner Orifice #52
1
904-529
5/32" Allen Key
1
918-590
Label "Converted to LP"
1
919-728
Orange Propane label
1
910-037
#30 ULPG Pilot Orifice
1
920-209
Instruction Sheet
1)
Shut off the gas supply and unplug the
power cord.
2)
Carefully remove the glass, logs and
lava rock.
3)
Remove burner.
4)
Remove burner orifice with a 1/2"
wrench and discard. Use a wrench to
hold on to the elbow behind the orifice.
5)
Reinstall new burner orifice stamped #52
and tighten.
6)
Pull out the pilot hood by hand.
Pilot
Hood
920-209
|
22
Regency
PG36 Gas Fireplace
®
Conversion Kit #517-968 from NG to LPG
IF IN DOUBT DO NOT DO THIS CONVERSION !!
Pilot
Hood
removed
Pilot
Orifice
7)
Remove the pilot orifice with the allen
key.
8)
Put in the new LPG orifice with the allen
key. Then put back the pilot hood.
Burner Orifice
9)
10) Open the bottom louver.
11) Remove the front cover by undoing the 2
12) Stick the conversion label "This unit has
13) Replace the black "NG" label with the
14) Carefully pull out the control box from
Note: The control box is held in place with
1
Adjust the burner aeration setting to full
open and re-install the burner.
screws.
Front Cover
been converted to Propane" over top of
the serial number decal.
orange "Propane" label.
underneath the firebox.
velcro.
01.09.20
Advertisement
Table of Contents
