Adam Equipment CBW Series Manual page 9

It sets the limits for check
[Limit]
weighing and allows setting of
either the low limit or the high
limit or both.
It enters the percent weighing
[%]
function.
unit weight, and count to be
seen when parts counting.
This is used to select the
[Func]
function of the scale.
the scale is weighing, it will
select parts counting. When it
is not in the weighing mode it
will return the user to weighing.
It is used to print the results to
[Print]
a PC or printer using the
optional RS-232 interface.
also adds the value to the
accumulation memory if the
accumulation function is not
automatic.
It is used to change the
[Units]
weighing units of the display
from kilograms to grams and
back to kilograms for CBW
series.
For CBWa scales this key will
select
Pounds and Pounds/ounces
for the
enabled. This should only be
done in gross weighing or at
zero.
© Adam Equipment Company 2006
Allows the weight,
When
kilograms, grams,
weighing unit,
A secondary function
is available to move the active digit
to the right when setting values for
parameters or other functions.
A secondary function
available to move the active digit to
the left when setting values for
parameters or other functions.
A secondary
available to act as a clear key
when setting values for parameters
or other functions.
A secondary function [ESC] is
used to return to normal operation
It
when the scale is in a parameter
setting mode.
None.
if
7
is
function is
[C]