Adapter Parameters
Appendix B provides information about the RS-485 DF1 adapter
parameters.
Topic
About Parameter Numbers B-1
Parameter List
About Parameter Numbers
The parameters in the adapter are numbered consecutively. However,
depending on which configuration tool you use, they may have different
numbers.
Configuration Tool
•
DriveExplorer
•
DriveExecutive
•
HIM
Parameter List
Parameter
No. Name and Description
01
[DPI Port]
Port to which the adapter is connected. This will
usually be port 5.
02
[DPI Data Rate]
Data rate used by the drive. This data rate is set in
the drive, and the adapter detects it.
03
[DF1 Addr Cfg]
Node address if the Data Rate switch is set to
"PGM" (Program).
04
[DF1 Addr Actual]
DF1 node address actually used by the adapter.
Page
B-1
Numbering Scheme
The adapter parameters begin with parameter 1. For
example, Parameter 01 - [DPI Port] is parameter 1 as
indicated by this manual.
Details
Default:
Minimum:
Maximum:
Type:
Default:
Values:
Type:
Default:
Minimum:
Maximum:
Type:
Reset Required:
Default:
Minimum:
Maximum:
Type:
B
Appendix
0
0
7
Read Only
0 = 125 kbps
0 = 125 kbps
1 = 500 kbps
Read Only
1
0
254
Read/Write
Yes
1
0
254
Read Only