Content Of The Technical Documentation; Device Documentation In Printed Form; Device Documentation In The Form Of Pdf Files - JUMO LOGOSCREEN 700 Brief Instructions

1.6

Content of the technical documentation

The documentation for this device is addressed to plant manufacturers and users with appropriate tech-
nical expertise; it consists of the following documents.
1.6.1

Device documentation in printed form

70653000T97...
Quick start guide (brief instructions)
A hard copy of the quick start guide is part of the scope of delivery of the device.
The quick start guide describes the steps to take for mounting and electrical connection, as well as the
operation of the device. It also contains the order details and a list of technical data.
The quick start guide is an excerpt from the operating manual.
1.6.2

Device documentation in the form of PDF files

The following documents are available for download from the manufacturer's website. They also form
part of the scope of delivery of the optional software package.
70653000T10...
Data sheet
The data sheet contains general information about the device, the order details, and the technical data.
It forms the basis for selecting the device and making a purchasing decision.
70653000T90...
Operating manual
The operating manual contains full details on mounting, the electrical connection, operation, parameter-
ization, and the configuration of the device. In addition, it contains the order details and a list of technical
data.
In the case of the present device, the operating manual also describes the use of the setup program (PC
program) with which the device can also be configured.
70653000T92...
Modbus interface description
The interface description provides information on communication with other devices or superordinate
systems using the Modbus protocol (Modbus-RTU, Modbus-TCP).
In the case of the present device, the interface description also contains specifications on communica-
tion via Ethernet.
70653007T92...
PROFINET interface description
This document explains the use of the PROFINET interface, which can be used to integrate the device
into a PROFINET network as an IO device. A GSD file (GSDML) is available for the programming system
of the IO controller and describes the features of the device.
70653000T96...
ST editor manual
This document describes the application of the ST editor with which users can create their own applica-
tions in the PLC programming language "structured text" (ST) for the device. The document is intended
for users with relevant programming knowledge.
The ST editor is a component of the setup program.
1 Introduction
13