Completed Batch - JUMO LOGOSCREEN 700 Brief Instructions

5 Operation
5.4.7

Completed batch

This function displays the report for the completed batch recording. Recorded data can be shown as a
report and as a curve diagram.
If necessary, the report can also display the data from current batch recording.
View
(1)
(1) Open report (statistical information for
the completed batch recording, and, if
necessary, the current batch recording)
Electronic signature
With extra code 888 (FDA) and with the corresponding configuration in the PCS software, the completed
batch can be provided with an electronic signature. The signature can only be provided once per com-
pleted batch; it cannot be revoked. If a signature was provided already then this state is displayed
through the following symbol (3):
Any user who has the corresponding authorization can sign the signature ("Confirm batches, electronic
signature" right). This can be a different user to the one who is currently logged on.
Configuration of the electronic signature: see operating manual, chapter "Configuration - only in setup
program" > "Electronic signature".
Example of an electronic signature:
chapter 5.8 "Electronic signature", page 69
58
(2) Open curve presentation (analog curves
and digital traces of the completed batch
recording)
(3) Render electronic signature or display in-
formation about rendered signature
(2)
(3)