Curve Diagram - JUMO LOGOSCREEN 700 Brief Instructions

5.4.1

Curve diagram

In the curve diagram, the analog and digital signals configured for the relevant group are displayed as
analog curves or digital traces. Digital traces and channel information can be hidden in the group con-
figuration.
The diagram type (horizontal, vertical) is selected individually for each group in the configuration. The
following view shows the vertical diagram. Accordingly, the description also applies to the horizontal di-
agram (see the example later on).
Group view
(1)
(2)
(3)
(4)
(1) Designation (pointer) of the analog curve
(2) Analog curve (color change in the event
of an alarm)
(3) Auxiliary line (configurable)
(4) Channel information: designation (point-
er), signal abbreviation (configurable),
and current value of analog signal (color
change in the event of an alarm)
Touch the button to display the channel
individually (incl. scaling and limit val-
ues).
Navigation bar
(1) Hide/show digital traces
(2) Hide/show channel information
(3) Hide/show analog values
(4)
(5) Digital trace
(6) Event off
(7) Alarm off
(8) Event on
(9) Alarm on
(10) Signal description (instead of abbrevia-
tion)
(11) Navigation bar
(1) (2) (3)
(4) Call up memory view (history)
(5) Go to next active group
5 Operation
Designation (pointer) of the digital trace
(4) (5)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
47