English
Daily maintenance
Clean the exterior of the unit.
✂
Check that the harness is undamaged.
✂
Check the blade guard for damage or cracks. Change the guard
✂
in case of impacts or cracks.
Check that the cutting attachment is properly centred, sharp,
✂
and without cracks. An o
-centre cutting attachment induces
✁
heavy vibrations that may damage the unit.
Check that the cutting attachment nut is su ciently tightened.
✂
Make sure that the blade transport guard is undamaged and
✂
that it can be securely fi tted.
Check that nuts and screws are su ciently tightened.
✂
Weekly maintenance
Check the starter, especially the cord and return spring.
✂
Clean the exterior of the spark plug.
✂
Remove it and check the electrode gap. Adjust it to 0.6 mm, or
✂
change the spark plug.
Check that the angle gear is fi lled with grease up to 3/4.
✂
Clean the air fi lter.
✂
Monthly maintenance
Rinse the fuel tank with gasoline.
✂
Clean the exterior of the carburetor and the space around it.
✂
Clean the fan and the space around it.
✂
14