Viessmann Vitodens 200 Technical Manual page 67

Self-supporting mounting frame installation Vitodens 200 and 300
A Self-supporting mounting frame for
the Vitodens with mounting panel
B Ceiling mounting extension
(Vitodens)
C Self-supporting mounting frame for
wall mounted DHW cylinders incl.
ceiling fixing extension
VITODENS
2.3 Installation in unfinished buildings
D Wall mounted DHW cylinder (80 litres
capacity)
E Vitodens
F Mounting panel for gas fired combi
boiler
G Mounting panel for gas fired boiler
H In conjunction with DHW cylinders
installed below the boiler min.
1 933 mm
Self-supporting mounting frame
for the Vitodens and wall mounted DHW
cylinder (80 litres capacity).
Suitable for wall mounting, for
self-supporting installation or for
planking.
With fittings and gas angle valve G ¾"
with thermal safety shut-off valve.
H for gas fired combi boiler
with solder fittings
with compression fittings
H for gas fired boiler
with solder fittings
with compression fittings
Note regarding Vitodens 300 from 49 kW:
The Vitodens 300 with 49 kW and 66 kW
can also be installed on the
self-supporting mounting frame.
The boiler stands 20 mm proud (on both
sides) of the self-supporting mounting
frame.
The mounting panel and the DHW
cylinders to be hung alongside the boiler
are unsuitable for the Vitodens 300 with
49 kW and 66 kW output.
2
67