Headlight Switch
Pivot the switch downward to turn on the headlights
(Figure
23).
Enable/Disable Switch
Use the enable/disable switch
conjunction with the lower mow/raise control lever to
operate the cutting units.
Backlap Levers
Use the backlap levers in conjunction with the lower
mow/raise control lever for backlapping the reels
(Figure
24).
Figure 24
1. Backlap levers
Hydraulic-Filter Restriction
Indicator
With the engine running at normal operating
temperature, ensure that the indicator is in the green
zone
(Figure
25). When the indicator is in the red
zone, change the hydraulic filters.
(Figure
23) in
g021209
1. Hydraulic-filter-restriction indicator
Power Point
The power point is a 12 V power supply for electronic
devices
(Figure
26).
1. Power point
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine such as the operating status, various
diagnostics and other information about the machine
(Figure
27) There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen, at any time, by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
18
Figure 25
Figure 26
g004132
g004133