Toro Reelmaster 5410 Operator's Manual page 19

1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button— Press
this button to access the InfoCenter menus.
You can use it to back out of any menu you are
currently using.
•
Middle Button— Press this button to scroll down
menus.
•
Right Button— Press this button to open a menu
where a right arrow indicates additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
InfoCenter Icon Description
SERVICE DUE
Figure 27
3. Middle button
4. Left button
Indicates when scheduled service
should be performed
Hour meter
Info icon
Fast
Slow
Fuel level
The glow plugs are active.
Raise the cutting units.
InfoCenter Icon Description (cont'd.)
g020650
19
Lower the cutting units.
Sit in the seat.
The parking brake is On.
The range is high (transport).
Neutral
The range is low (mow).
Engine-coolant temperature (°C or
°F)
Temperature (hot)
The PTO is engaged.
Not allowed
Start the engine.
Stop the engine.
Engine
Key switch
The cutting units are lowering.
The cutting units are raising.
PIN passcode
CAN bus
InfoCenter
Bad or failed
Bulb
Output of TEC controller or control
wire in harness
Switch