Key Switch; Headlight Switch - Toro Groundsmaster 4300-D Operator's Manual

1. Lower mow/raise control
lever

2. Key switch

3. InfoCenter
Key Switch
The key switch (Figure
On/Preheat, and Start.
Lower Mow/Raise Control Lever
This lever (Figure 6) raises and lowers the cutting
decks and also starts and stops the mowers when the
mowers are enabled in the mow mode. When starting
the decks in the down position, this lever will turn the
decks on if the PTO and the mow speed limiter are
engaged.

Headlight Switch

Pivot the switch downward to turn on the headlights
(Figure 6).
Enable/Disable Switch
Use the enable/disable switch
with the lower mow/raise control lever to operate the
mowers. The mowers cannot be lowered when the
mow/transport lever is in the transport position.
InfoCenter
The InfoCenter LCD display shows information about
your machine such as the operating status, various
diagnostics and other information about the machine
(Figure 6).
Figure 6
4. Enable/disable switch
5. Engine speed switch
6. Headlight switch
6) has three positions: Off,
(Figure 6) in conjunction
Hydraulic Filter Restriction
Indicator
With the engine running at normal operating
temperature, view the indicator
in the Green zone. When the indicator is in the Red
zone, change the hydraulic filters.
g021208
1. Hydraulic filter restriction indicator
Power Point
The power point is a 12 volt power supply for
electronic devices
1. Power point
14
(Figure 7), it should be
Figure 7
(Figure 8).
Figure 8
g004132
g004133