General Reader; Parameters Via Fb / Mv Code Reader - Siemens SIMATIC RF120C Operating Instructions Manual

4.3.2.7

General Reader

Table 4- 12 General Reader
Parameter
Input box for byte sequence
(hexadecimal notation)
4.3.2.8

Parameters via FB / MV code reader

Table 4- 13 Parameters via FB / MV code reader
Parameter
MOBY mode
Communications module RF120C with application blocks for S7-1200 and S7-1500
Operating Instructions, 07/2013, C79000-G8976-C328-01
Parameter value Default value
00000000 00000000
Parameter value Default value
RF200, RF300, RF200, RF300,
RF600, MOBY D/U, RF600, MOBY D/U,
MV MV
Parameter assignment and configuration
4.3 Parameter assignment with the device configuration
Description
Expert mode
With this function, you can specify the reset
parameters directly in hexadecimal notation.
This setting may only be selected if you have
previously received the hex string for the
setting from a member of the SIEMENS staff.
Description
Currently, only the parameter "RF200, RF300,
RF600, MOBY D/U, MV" can be selected.
Note the Reset function blocks in Appendix B.
29