2.2
Setup and configuration
This section describes the setup of a SIMATIC S7-1200 with RF120C as an example.
Configuration
The SIMATIC S7-1200 is designed for panel or rail mounting and consists of the following
components:
● SIMATIC S7-1200
● Power supply unit
● Up to 3 communications modules (CM); e.g RF120C
● Up to 8 signal modules (SM)
You can thus set the focus of your configuration on local requirements.
The simple handling of the SIMATIC S7-1200 ensures fast commissioning and user-friendly
maintenance.
①
②
③
④
⑤
Figure 2-2
Communications module RF120C with application blocks for S7-1200 and S7-1500
Operating Instructions, 07/2013, C79000-G8976-C328-01
RF120C communications module
CPU SIMATIC S7-1200
Signal modules
DIN rail mounting clip
DIN rail / panel
SIMATIC S7-1200 with RF120C
Description
2.2 Setup and configuration
9