Regulatory Standards - ABB ATS022 Installation And Operating Instructions Manual

9.

Regulatory standards

9. Regulatory standards
ATS022 conforms to the following regulatory standards:
• European Directive 73/23 "LVD – Low Voltage Directive"
• EN 50178 electronic equipment for use in power Installations
• EN-IEC 62103 electronic equipment for use in power Installations
• EN-IEC 60947-5-1 low voltage switchgear and control gear: control circuit devices and switching
elements
• Electromagnetic compatibility EN 50081-2, EN 50082-2
• Environmental conditions IEC 68-2-1, IEC 68-2-2, and IEC 68-2-3
• EN-IEC 61000-4-2: Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques Section 2: Electrostatic discharge immunity test Basic EMC Publication (IEC 61000-4-2
[8KV air, 4KV cont])
• EN-IEC 61000-4-3, Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques Section 3: Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3)
• EN-IEC 61000-4-4, Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques Section 4: Electrical fast transient/burst immunity test Basic EMC Publication (IEC 61000-
4-4)
• EN-IEC 61000-4-5, Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques Section 5: Surge immunity test (IEC 61000-4-5)
• EN-IEC 61000-4-6: Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques (IEC 61000-4-6)
• EN-IEC 61000-4-8: Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques (IEC 61000-4-8)
• EN 50093, Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques
Section 11: Voltage dips, short interruptions and voltage variations immunity test (IEC 61000-4-11,
[100ms/5s] B, C criterion)
• CISPR11 (30MHz...1GHz): Emission (Generic Standard, Industrial) – Radiated
• CISPR11 (0.15MHz...30MHz): Emission (Generic Standard, Industrial) – Conducted
• CISPR/CEI 1000-6-3: Part 6: Generic standards – Section 3: Emission standard for residential,
commercial and light-industrial environments
• IEC 60068-2-2: Environmental testing. Part 2: Tests. Test B: Dry heat
• IEC 60068-2-6: Environmental testing. Part 2: Tests. Test Fc: vibration (sinusoidal)
• IEC 60068-2-27: Environmental testing. Part 2: Tests. Test Ea and guidance: shock
• IEC 60068-2-30: Environmental testing. Part 2: Tests. Test Db and guidance: Damp heat, cyclic
• IEC 60068-2-1: Environmental testing. Part 2: Tests. Test A: cold (-20 °C ± 3 °C, 16 hours)
1SDH000760R0002
Installation and operating instructions, ATS022
41