Table of Contents
Advertisement
Chapter 2 | Preparing the Avaya Scopia
Perform procedures in this section to prepare the site and device for installation.
Navigation
•
Checking Site Suitability
•
Unpacking the Device
•
Inspecting for Damage
Checking Site Suitability
Prior to setting up your device, you need to verify your site suitability for:
• System power requirements
• System environmental requirements
• The device physical dimensions.
For more information, see
about these requirements. Ensure the site conforms to the listed requirements.
Unpacking the Device
About this task
We strongly recommend that you follow safety guidelines described in this section during unpacking.
Procedure
1. Inspect the shipping box to verify that it is not seriously damaged during shipping.
2. Place the shipping box on a horizontal surface paying attention to the This Side Up symbol
Installation Guide for Avaya Scopia
Application server Setup
on page 6
on page 6
on page 7
Technical Specifications and Environmental Requirements
on the shipping box
(Figure 1: This Side Up symbol
®
Application Server Version 2
on page 7).
®
Preparing the Avaya Scopia
®
on page 4to learn
Application server Setup | 6
Advertisement
Table of Contents
