Warnings - Magicfx SHOT BASE DMX Manual

User documentation MAGICFX® Shot Base DMX
6.3

WARNINGS

Warning texts have been attached to the Shot Base DMX. With regard to these the following rules
apply:
- These texts may not be removed or damaged. The operator must regularly check if this is the
case.
- The operator must ensure that the texts are and remain clearly visible and legible.
Sign and explanation
PIC 616 Follow the instructions
The operator must be told that he/she may only
operate the Shot Base DMX after reading the
user manual.
A warning is given for this by means of the
command sign of PIC 616. This sign should be
attached to the type sign. See also the photo.
Sign and explanation
PIC 307 Danger: high voltage
A warning must be given about the machine's
high voltage by using the caution sign PIC 307.
This sign must be attached to the Shot Base
DMX. See also the added photo.
Page 9
DANGER WARNING:
One must replace texts or signs if these are absent, damaged or
illegible.
Photo
Photo