Procomp B687 Manual page 18

B687
!
The CPU Retention has
to go in a particular direction.
Make sure that it is the right way
round before slotting it in. Do not
force it in, otherwise you may
damage the motherboard and
CPU Retention.
4. Ensure that the CPU Retention has been slotted all the way in, then
screw the four plastic screws into the sockets on each side of Slot1 to
make sure that the CPU Retention is fixed firmly in position.
5. Slide the CPU slowly into Slot1 along the two sides of the CPU
Retention.
17