Procomp B687 Manual page 22

B687
2. Push down the latches on each side of the SDRAM socket.
3. Install the DIMM into the socket and press it carefully but firmly down so
that it seats correctly. The latches at either side of the socket will be
levered upwards and latch on the edges of the DIMM when it is installed
correctly.
How to Remove DIMM Modules from Motherboard
1. Press the holding the latches at either side of the socket outward to release
the DIMM.
2. Gently pull the DIMM out of the socket.
No jumper setting is necessary for DRAM setting, BIOS will check
DRAM type and size automatically. The motherboard contains 2 by
168-pin DIMM socket (DIMM1, DIMM2). The motherboard has table-
free ( or auto-bank ) feature and user can install DIMM into any bank.
The two DIMMs Sockets for system memory expansion from 8MB to
256 MB. Each bank provides 64-bit wide data path. You can install
21