Ide Hdd Auto Detection - Procomp B687 Manual

B687
Type the password, up to eight characters, and press <Enter>.
password typed now will clear any previously entered password from CMOS
memory. You will be asked to confirm the password. Type the password
again and press <Enter>. You may also press <Esc> to abort the selection
and not enter a password.
If you select System at Security Option of BIOS Features Setup Menu, you
will be prompted for the password every time the system is rebooted or
anytime you try to enter Setup. If you select Setup at Security Option of
BIOS Features Setup Menu, you will be prompted only when you try to enter
Setup.

IDE HDD Auto Detection

This feature allows you to check all the informations on your hard disk
formation. When you access "IDE HDD Auto Detection", the system
executes auto detection.
At the prompt, it represents all the informations on your HDD, and you are
asked:
1 If you accept the test result, press [Y] then [Enter] and the result is
saved, then the system continues to detect another HDD.
2 If not, press [N] then [enter] and the system continues to detect another
HDD.
ENTER PASSWORD
Do you accept this drive C: (Y/N) ?
44
The