Procomp B687 Manual page 33

B687
1 0 1 0 characters per second
12 12 characters per second
Typematic Delay (Msec)
When the typematic rate is enabled, this section allows you select the delay
between when the key was first depressed and when the acceleration begins.
Security Option
If you have installed password protection, this item defines if the password is
required at system start up, or if it is only required when a user tries to enter
the setup utility.
PCI/VGA Palette Snoop
This item can help overcome problems that are caused by some non-standard
VGA cards. We recommend that you leave this item at the default value
Disabled.
OS Select For DRAM > 64 MB
This item is required if you have installed more than 64 NM of memory and
you are running the OS/2 operating system. Otherwise, leave this item at the
default Non-OS2.
HDD S.M.A.R.T Capability
S.M.A.R.T is an industry acronym for Self-monitoring, Analysis and
Reporting Technology. If the documentation of your hard disk states that
S.M.A.R.T. is supported, you can enable this item.
Report No FDD For WIN 95
Set this item to Yes BIOS will report FDD to Win95. If in standard CMOS
setup, set Drive A to none, and set this item to yes. Inside Win95, My
Computer and File manager Disk(A:) will show Removable Disk (A:).
Video BIOS Shadow
This item allows the video BIOS to be copied to system memory for faster
performance.
250 250 msec
500 500 msec
750 750 msec
1000 1000 msec
31
24 24 characters per second
30 30 characters per second
Default: 250
Default: Setup
Default: Disabled
Default: Non-OS2
Default: Enabled
Default: No
Default: Enabled