Integrated Peripherals - Procomp B687 Manual

B687

INTEGRATED PERIPHERALS

IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave
IDE Secondary Master PIO
IDE Secondary Slave
IDE Primary Master UDMA
IDE Primary Slave
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
On-Chip Primary
On-Chip Secondary PCI IDE
USB keyboard Support
Init Display First
KBC input clock
Onboard FDC Controller
Onboard UART Port 1
Onboard UART Port 2
UART2 Mode
Half Duplex time-out
IDE HDD Block Mode
This allows your HDD controller to use the fast block mode to transfer data
to and from your HDD drive; Enabled IDE controller uses block mode ;
Disabled IDE controller uses standard mode.
IDE Primary Master/Slave PIO
IDE Secondary Master/Slave PIO
PIO - Programmed Input / Output, it allows the BIOS to tell the controller
what it wants and then let the controller and the CPU to complete the task by
themselves. This is simpler and more faster. Your system supports five modes,
0 - 4, which primarily differ in timing. When Auto is selected, the BIOS will
select the best available mode.
IDE Primary Master/Slave UDMA
Auto, will support the Ultra DMA function. Disabled, will not support the
Ultra DMA function.
ROM PC/ISA BIOS(2A69KPND)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
: AUTO
PIO : AUTO
: AUTO
PIO : AUTO
: AUTO
UDMA : AUTO
: AUTO
: AUTO
PCI IDE : Enabled
: Enabled
: Disabled
: PCI Slot
: 8 MHz
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: Normal
: Enabled
Onboard Serial Port 1
Parallel Port Mode
ECP Mode Use DMA
Esc : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Default
F7 : Load Setup Default
Default: Enabled
Default: Auto
Default: Auto
41
: 3F8/IRQ4
:
ECPEPD1.9
:3
↑↓→← : Selection Item
PU/PD/+/- : Modify
(Shift) F2 : Color