Advertisement
5
Aligning the Label Roll
Press the
button and check that the label feeds out correctly.
Note- If the label does not feed correctly please refer to label alignment
instructions inside the printer top cover.
Tear off the correctly dispensed label.
6
Connecting the USB Cable
Connect your printer to your computer with the USB cable.
Note- Ignore any Windows errors that may occur at this time and continue with
Step 9.
7
Downloading the Printer
Driver
Ensure you are signed into SendPro
Select the Datamax Printer Driver
Select to download the correct printer driver for your operating system.
Select Run or Open dependant on your browser.
Accept the licence agreement and follow the on screen prompts to install.
Select Datamax-O'Neill1110
Continue to follow the on-screen prompts and click Finish/ Close.
Note- You may need to check your downloads folder to install Printer Drivers.
8
Test Print
Your Printer is now connected.
To test your printer is working correctly follow the steps below-
On a PC
Go to your Control Panel
Select Devices & Printers
Double click on the Printer
(DataMax-O'Neil w1110)
Select Printer from the menu bar
Select Printer Properties
Select General
Select Print Test Page.
Congratulations! You have completed your USB setup.
and click on the Help icon.
®
Advertisement
