4.3. Cuff connection
Insert the cuff tube into the opening provided on the left
side of the instrument, as shown in the diagram.
4.4. Setting the time and date
This blood pressure monitor automatically records the time and date of each measurement. This is very
important information as blood pressure normally varies over the course of a day.
After new batteries have been inserted, the time/date display shows the following setting: 2000-01-01
00:00 O'clock. (year-month-day-time)
You must then re-enter the date and current time. For this, please proceed as follows (Example: Entering
(year-month-day-time) 2001-06-15 Time 09:30 O'clock):
1. Press the Time button for at least 3 seconds. The
display now indicates the set year, during which the
four characters blink.
2. The correct year can be entered by pressing the
MEMORY button. Once for each change.
(Example: 1 x press).
3. Press the Time button again. The display now switches
to the current date, during which the first character
(month) blinks.
Note:
Holding the button down speeds up the procedure.
4. The current month can now be entered by pressing
the MEMORY button. Example: pressing 6 x advances
6 months)
5. Press the Time button again. The last two characters
(day) are now blinking.
8
M
M