Initial Instrument Functionality Check - Keysight Technologies N9030B Installation Note

Option RTS, Streaming

Initial Instrument Functionality Check

Power on the instrument and allow the instrument to boot up, run the alignments and display the
measurement screen. The instrument will probably display a spectrum analyzer screen and you will
see the instrument sweeping.
There should be no alignment failures. If there are failures, investigate and fix the problem before
continuing.
Instrument Software Installation
Upgrade the software to the latest revision. Software installation assures that any software related
changes to the instrument files will be performed by the software installation.
To verify the current version, press System, Show System and look for the "Instrument S/W
Revision".
The latest revision of the X-Series Signal Analyzers software may be downloaded from:
http://www.keysight.com/find/xseries_software
Installation Note N9030-90087 5