When Checking Backward - Suzuki Wagon R Instruction Manual

000.book 56 pages Friday, July 28, 2017 2:30 PM
Equipment handling / audio

■ When checking backward

Turn on the engine switch.
1
→ Page 4-9 (How to Engine)
Put the select lever in R.
2
→ Page 4-16 (Operation of select lever)
"Top image + Backward image" is automatically displayed on the screen automatically.

Each time you press the camera switch, the screen changes as follows.
3
Top image + backward image
Display surrounding of the
vehicle and forward
5
Display video around the
vehicle and behind the vehicle
Vehicle on the side of the passenger's seat
side and behind the vehicle are displayed
 If you set the select lever to anything other than R, the screen that was displayed
just before entering R
Advuce
 The image behind the omni directional monitor is displayed with priority over
any screen display. However, it is not projected while the navigation main unit is
running.

When the engine switch is ON, the omni directional monitor will operate even
when the power of the navigation main unit is turned off.  Picture quality can
be adjusted while camera video is displayed. For details, refer to the navigation
Please read the manual.
5-56
Side image + backward image
please check around the
vehicle directly
Back wide image
Display surrounding of the
vehicle and forward
Display the video behind the
vehicle in wide range
63R030509