Security Alarm Mode; How To Switch The Mode Setting - Suzuki Wagon R Instruction Manual

Hide thumbs Also See for Wagon R:
Table of Contents

Advertisement

000.book 19 pages Friday, July 28, 2017 2:30 PM

Security alarm mode

There are two modes: <alarm mode>
and <no alarm mode>. The operation
of the alarm is as follows.
<Alarm mode> (factory shipped)
An emergency flashing indicator
blinks for about 40 seconds and an
indoor buzzer sounds intermittently
for about 10 seconds. When the indoor
buzzer sounds, the horn will ring
intermittently for about 30 seconds.
The security alarm indicator also
flashes during operation.
<No alarm mode>
Alarm will not be activated.

How to switch the mode setting

With the security alarm canceled,
please switch in the following
procedure.
Sit in the driver 's seat and check
1
that all the doors are closed.
If one of the doors is open, the half
door warning light will be on. 
Page 3-79 (half door warning light)
Move the locking lever (1) to the
2
unlocking side (towards the back
of the car). Set the light switch to
the OFF (2) position.
Before driving / alarm device
 The light switch in the above
figure is a typical example. It
depends on the type of car.
→ page 3-108 (light switch)
※ The next 3 to 4 series of
procedures should be completed
within 15 seconds.
Turn the light
3
and return to the OFF position. I will do
this 4 round trips.
Unlock
(1)
81M30280
(2)
74P30150
3
switch to the position
4 Round trips
74P30160
3-19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents