Software installation
Software installation
The latest VSA (89601B) software version can be downloaded from
http://www.keysight.com/find/VSA.
The support of M9703B digitizer also requires installing a plugin so that VSA can
recognize this hardware. This MD2 Hardware Extension for VSA software can be
accessed from following link:
MD2 Digitizers Hardware Extension for 89600 VSA Software
or found from M9703B product page (www.keysight.com/find/M9703B) > Technical
Support > Drivers, Firmware, and Software.
Once downloaded, execute MD2DigitizersHwExt_Setup-<versions>.exe and follow
the installation process.
Checking if your hardware is included in VSA's extension manager
Start > All Programs > VSA Extension Manager
Look for your hardware at the bottom, if not listed, then install the hardware extension
as described above.
4
VSA (89601B) gets updated frequently to support new hardware.
You must reinstall the above plugin anytime you upgrade the VSA
software version.
M9703B Hardware Extension of 89600 VSA Software