Keysight M9703B Configuration And Measurement Instructions page 19

Multi-Module Measurements
The M9703B supports multi-module synchronization.
To synchronize two or more M9703Bs, you should create a configuration with several
instruments:
From the menu, go to Utilities > Hardware > Configurations, and click on Add New
Configuration button (
a. Select your Keysight MD2 digitizers from the list of 'Possible Logical Instrument'
b. Select Keysight MD2 digitizers from the list of 'Possible Logical Instrument' and
a. In the box below, select the units to be synchronized using the drop-down list: a
b. Select the name for this analyzer configuration.
c. Click OK to close the 'New Hardware Configuration' dialog.
d. Before closing the 'Hardware Configurations' dialog, use the Current Analyzer
M9703B Hardware Extension of 89600 VSA Software
)). The 'New Hardware Configuration' dialog opens.
and drag it or click on the
drag it or click on the
step for each digitizer to be synchronized.
digitizer per Keysight MD2 Digitizer configuration previoulsy selected.
Configuration drop-down to select the newly created Configuration as the
current item.
button to add it to the 'Configuration' box.
button to add it to the 'Configuration' box. Repeat this
Multi-Module Measurements
19