Keysight M9703B Configuration And Measurement Instructions page 7

High-speed digitizers hardware extension of keysight 89600 vsa software

Hide thumbs Also See for M9703B:

89600 VSA Software Configuration

Configuring the 89600 VSA software application to use the

digitizer hardware

Create a configuration for Keysight M9703B digitizer

1. Start the 89600 VSA software application.

2. Configure the digitizer as the VSA measurement input by creating an 'Analyzer

M9703B Hardware Extension of 89600 VSA Software

Configuration' that uses your digitizer as the Logical Instrument (ADC) by per-

forming the following steps:

a. From the menu, go to Utilities > Hardware > Configurations, and click on

Add New Configuration button (

dialog opens.

b. De-select 'Simulate Hardware' if it is selected (1).

c. Select Keysight MD2 digitizers(2) from the list of 'Possible Logical Instru-

ment' and drag it or click on the

figuration' box .

89600 VSA Software Configuration

). The 'New Hardware Configuration'

button (3) to add it to the 'Con-

Table of Contents