Table of Contents
Advertisement
Chapter 3 Optimize Your System Performance for Downloads and Staging
5
Double-click the bootloader source. The Set Up BFS Source window for the
bootloader opens.
6
Set the Data Rate to 3.00 Mbps.
7
Click Save.
Results:
The Set Up BFS Source window closes.
The DNCS saves the new settings.
The BFS automatically repopulates the data carousel. During this period, the
carousel may be down for a few minutes.
Note: The staging process could be affected when you change data rates. The
download interruption is brief, as the session restarts in a few minutes.
42
734375 Rev H
Advertisement
Table of Contents
