Registering The Hdd Test Server With The Bfs - Cisco Explorer Series Staging Manual

Appendix D
Adding an HDD Test Server to the BFS

Registering the HDD Test Server with the BFS

Note: This procedure can be used for systems that support multiple or single sites.
1 On the DNCS Administrative Console, select the Application Interface Modules
tab.
2 Click BFS Client. Choose one of the following options:

For single-site systems, the Broadcast File Server List window opens. Click
File > All Sites.

For multiple-site (RCS-enabled) systems, the Please Select a Site window
opens.
3 Click File > New Server. The Set Up Server window opens.
4 Enter the following data into the fields of the Set Up Server window:

Click the Server Name arrow and select hddtest.

Click the 2-way Mode option.

From the Available Sources list, select Out of Band.

Click Add.
Result: The Set Up Server window is configured as shown in the following
example.
154 734375 Rev H