Kasco 8400EJ Owner's Manual page 23

The Linden nozzle (marked L inside one of the fi ns)
uses the 3/8" x 4" bolt.
Model HP
8400, 2.3 2
3.1, 3.3 3
5.3 5
The Willow nozzle (marked W on the inside of the
cone) uses the 3/8" x 4" bolt.
Model HP
8400, 2.3 2
3.1, 3.3 3
The Juniper nozzle (marked with J on in inside of the
nozzle cone) uses the 3/8" x 4" bolt.
Model HP
8400, 2.3 2
3.1, 3.3 3
Height Width
4.7 m 10.4 m
4.1 m 9.8 m
4.9 m 8.5 m
Height Width
3.4 m 10.4 m
3.6 m 8.2 m
Height Width
1.8 m 13.4 m
2.7 m 12.2 m
The Spruce nozzle uses the three self tapping screws
to attach over the pump housing and the Y Insert must
be removed.
Model HP
8400, 2.3 2
3.1, 3.3 3
The Birch display does not use a nozzle or bolt. It is
the fountain unit running without any nozzle and al-
lows for the best fl ow rate and oxygen transfer!
Model HP
8400, 2.3 2
3.1, 3.3 3
5.3 5
The Sequoia nozzle (marked S on the inside of the
cone) uses the 3/8" x 2.5" bolt.
3.1EJF, 3.3E(H)JF, 5.3E(H)JF ONLY
Model HP
3.1, 3.3 3
5.3 5
Height Width
5.5 m 3 m
5.8 m 2.1 m
Height Width
3.5 m 1.8 m
3.0 m 4.0 m
3.0 m 3.0 m
Height Width
4.6 m 3.0 m
5.8 m 3.0 m
9