Configuration (Dmx); Starting Address; Dmx Personalities - Chauvet DJ Intimidator Wash Zoom 450 IRC User Manual

Configuration
(DMX)

Starting Address

DMX
Personalities
Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Intimidator Wash Zoom 450 IRC uses up to 29 DMX channels in its 29-channel DMX
mode, which defines the highest configurable address to 484.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU>.
Use <UP> or <DOWN> to choose Address.
2.
3. Press <ENTER>.
Use <UP> or <DOWN> to select the starting address.
4.
5. Press <ENTER>.
The Intimidator Wash Zoom 450 IRC has two DMX personalities, a 29-channel
personality and a 14-channel personality.
To choose which DMX personality to use, follow the steps below:
1. Press <MENU>.
Use <UP> or <DOWN> to choose Run Mode.
2.
3. Press <ENTER>.
4. Use <UP> or <DOWN> to select DMX.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to choose either 29CH (to choose the 29-channel
personality) or 14CH (to choose the 14-channel personality).
7. Press <ENTER>.
Page 11 of 27