Table of Contents
Advertisement
IR Mode
IRC-6 Operation
Page 22 of 27
IR mode allows the product to be controlled with an infrared remote controller. The
IRC-6 can remotely set the product to various modes; adjust the color, speed and
sensitivity; and set the strobe.
To set the product to IR mode, do the following:
1.
Make sure the product is plugged into a power source and not connected to a DMX
cable.
2.
Press <MENU>.
Use <UP> or <DOWN> to choose Run Mode.
3.
4.
Press <ENTER>.Use <UP> or <DOWN> to choose IR.
Press <ENTER> and the indicator on the front of the Intimidator Wash Zoom 450
5.
IRC blinks.
Be sure the IRC-6 remote is pointing directly at the product and there is nothing in
between the remote and the product.
The list below describes which features each button controls.
<BLACKOUT> - Turns LED on and off.
•
•
<AUTO> - Activates Auto mode. Use the <+> and <-> buttons to cycle through Auto
programs.
•
<SOUND> - Activates Sound mode.
<STROBE> - Activates the strobe. Use the <+> and <-> buttons to increase or
•
decrease strobe speed.
<SPEED> - Adjusts the movement speed. Use the <+> and <-> buttons to increase
•
or decrease the pan/tilt speed.
<SENSITIVITY> - Adjusts sound sensitivity. Use the <+> and <-> buttons to
•
increase or decrease the sound sensitivity.
<%> - Adjusts the brightness of the LEDs. Use the <+> and <-> buttons to increase
•
or decrease the brightness of the LEDs.
<FADE/SNAP> or <FADE> - Activates Color Fade mode and Color Snap mode.
•
Press <FADE>/SNAP> to toggle Fade and Snap. Use the <+> and <-> buttons to
increase or decrease the Fade/Snap speed (fast to slow).
<MANUAL> - Activates Manual mode.
•
<R> - Adjusts the red LEDs. Use the <+> and <-> buttons to increase or decrease
•
the red output.
•
<G> - Adjusts the green LEDs. Use the <+> and <-> buttons to increase or
decrease the green output.
•
<B> - Adjusts the blue LEDs. Use the <+> and <-> buttons to increase or decrease
the blue output.
•
<W> - Adjusts the white LEDs. Use the <+> and <-> buttons to increase or
decrease the white output.
•
<A> - Adjusts the Pan/Tilt manually. Press <A> to toggle between Pan and Tilt. Use
the <+> and <-> buttons to increase or decrease the Pan/Tilt value.
<UV> or <P> - Adjusts the Zoom manually. Use the <+> and <-> buttons to
•
increase or decrease the Zoom value.
<+> - Increases values for controls as described above.
•
<-> - Decreases values for controls as described above.
•
<0>–<9> - Activates specific Auto modes. Can be used as a shortcut for the
•
combination of the <AUTO> button and the <+> and <-> buttons.
Intimidator Wash Zoom 450 IRC User Manual Rev. 2
Advertisement
Table of Contents
