Table of Contents
Advertisement
Operation
4. Operation
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview
to see the button locations on the control panel.
Button
Function
<MENU>
Press to find an operation mode or to back out of the current menu option
<UP>
Press to scroll up the list of options or to increase the numeric value in a function
<DOWN>
Press to scroll down the list of options or to decrease the numeric value in a function
<ENTER>
Press to activate a menu option or set the selected value in a function
Menu Map
Mode
Programming Levels
4Ch
DMX Mode
8Ch
Static Colors
C--
Automatic
P--
Programs
Auto Speed
S--
Dimmer
d--
Sound-
Snd
Active Mode
Sensitivity
SEnS
Custom
u--
Color Mixing
Bluetooth
bLE
Mode*
Control
SEt
Mode
*The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective
owners.
Configuration (DMX)
The EZLink Par Q4BT works with a DMX controller. Information about DMX is in the CHAUVET DMX
Primer, which is available from the Chauvet website:
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If the starting address is set too high, access to some of the product's channels could be
restricted.
The EZLink Par Q4BT uses up to 8 DMX channels, which defines the highest configurable address is 505.
For information about the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 4Ch or 8Ch shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the starting address, from d 1–509 (4Ch) or d 1–505 (8Ch).
4. Press <ENTER>.
EZLink Par Q4BT User Manual Rev. 7
Description
4-channel DMX mode
d 1–509
8-channel DMX mode
C 1–15
Static colors
P 1–5
Automatic programs
S. 1–100
Program speed for P1–5, slow to fast
L. 1–255
Dimmer for the Auto/Sound programs
Snd1–5
Sound-active programs
u 0–u100
Sound sensitivity
r. 0–255
G. 0–255
Custom static colors combine red, green, blue,
and amber
b. 0–255
A. 0–255
S. 0–100
Strobe rate
_ _ _ _ _
Bluetooth control mode, displays Bluetooth ID
on
ir
Turns infrared on or off
oFF
SLAV
Enables Master/Slave with other BT products
out
dMX
Enables Master/Slave with non-BT products
Page 7 of 15
Advertisement
Table of Contents
