Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
PRE-SETUP STEPS
The iMcV-10G-Converter SFP+/SFP+ modules have user-configurable
features: Loss Carry Forward (LCF), Speed (based on protocol selection)
and Loopback.
Your iMcV-10G-Converter SFP+/SFP+ has been tested for proper operation
before packaging and shipping. It should be in perfect mechanical and
electrical condition upon receipt.
ELECTROSTATIC DISCHARGE (ESD) PRECAUTIONS
This is an Electrostatic Sensitive Device. Use ESD precautions for safe handling.
Before removing the card from the anti-static protective packaging:
• Discharge any static electricity buildup on your body by touching a large
grounded metal surface or the metal chassis on equipment connected to
earth ground by a 3-wire power cord. Use of a grounding wrist strap is
recommended.
• Avoid touching the gold connectors or other parts on the card except when
necessary to set the configuration DIP Switches.
• Remove AC power from the computer before inserting the card.
WARNING! Integrated circuits and fiber optic components are
extremely susceptible to electrostatic discharge damage. Do
not handle these components directly unless you are a qualified
service technician and use tools and techniques that conform to
accepted industry practices.
iMcV-10G Fiber Mode Converter
5
SFP+/SFP+
Advertisement
Table of Contents
