Table of Contents
Advertisement
FIBER OPTIC CLEANING GUIDELINES
Fiber Optic transmitters and receivers are extremely susceptible to
contamination by particles of dirt or dust, which can obstruct the optic path and
cause performance degradation. Good system performance requires clean
optics and connector ferrules.
1.
Use fiber patch cords (or connectors, if you terminate your own fiber)
only from a reputable supplier; low-quality components can cause many
hard-to-diagnose problems in an installation.
2.
Dust caps are installed at the factory to ensure factory-clean optical
devices. These protective caps should not be removed until the moment
of connecting the fiber cable to the device. Should it be necessary to
disconnect the fiber device, reinstall the protective dust caps.
3.
Store spare caps in a dust-free environment such as a sealed plastic
bag or box so that, when reinstalled, they do not introduce any
contamination to the optics.
4.
If you suspect that the optics have been contaminated, alternate
between blasting with clean, dry, compressed air and flushing with
methanol to remove particles of dirt.
iMcV-10G Fiber Mode Converter
13
SFP+/SFP+
Advertisement
Table of Contents
Need help?
Do you have a question about the B+B SmartWorx IMcV-10G and is the answer not in the manual?
Questions and answers