Table of Contents
Advertisement
Step 3: Install the Software
Software installation procedure
1
2
3
Keysight M9195A PXIe Digital Stimulus/Response Startup Guide
Install the Keysight IO Libraries Suite from either the Keysight IO Libraries
Suite CD provided in your ship kit or get the latest from the web at:
www.keysight.com/find/M9195A
Firmware & Software). Follow the installer prompts to install the IO libraries.
Keysight IO Libraries Suite is required to run the DSR driver
software, including the DSR Soft Front Panel.
Install the M9195A product software:
Using the Keysight M9195A PXIe Digital Stimulus/Response Software and
a
Product Information CD (M9195-10002), launch the installer.
When the Install Wizard starts, click the Next button.
b
Follow the installer prompts. Read and Accept the License Agreement.
c
Click Next.
Choose a Complete installation to install all software and documentation.
d
Click Next.
Click Install to begin the installation.
e
Power Down the host PC and then the chassis if using a remote controller PC.
If you are using a remote controller, power order matters:
• When powering down, first power down the PC (before the chassis)
• When restoring power, first power up the chassis (before the PC)
(go to Visit Technical Support > Drivers,
17
Advertisement
Table of Contents
