Table of Contents
Advertisement
2
Installation
Initial Inspection
1 Unpack and inspect the shipping container and its contents throughly to
2 If the contents are damaged or defective, contact your nearest Keysight
3 If you are returning the instrument under warranty or for service, repackaging
14
ensure that nothing was damaged during shipment. If the shipping container
or cushioning material is damaged, the contents should be checked both
mechanically and electrically.
– Check for mechanical damage such as scratches or dents.
– Procedures for checking electrical performance are given under
check"
on page 25.
Technologies Service and Support Office. Refer to
Support"
on page 4 of this manual. Keysight Technologies will arrange for
repair or replacement of the damaged or defective equipment. Keep the
shipping materials for the carrier's inspection.
the instrument requires original shipping containers and material or their
equivalents. Keysight Technologies can provide packaging materials identical
to the original materials. Refer to
this manual for the Keysight Technologies nearest to you. Attach a tag
indicating the type of service required, return address, model number, and
serial number. Mark the container FRAGILE to insure careful handling. In any
correspondence, refer to the instrument by model number and serial number.
"Sales and Technical Support"
Keysight 8494/95/96A/B Operating and Service Manual
"Operator's
"Sales and Technical
on page 4 of
Advertisement
Table of Contents
