Installation; Initial Inspection - Keysight Technologies 11713B Operating And Service Manual

2

Installation

Initial Inspection

1 Unpack and inspect the shipping container and its contents thoroughly to ensure that nothing
was damaged during shipment. If the shipping container or cushioning material is damaged,
the contents should be checked both mechanically and electrically.
2 If the contents are damaged or defective, contact your nearest Keysight Technologies Service
and Support Office. Refer to
will arrange for repair or replacement of the damaged or defective equipment. Keep the
shipping materials for the carrier's inspection.
3 If you are returning your instrument for service, repackaging the attenuator/switch driver
requires original shipping containers and materials or their equivalents. Keysight Technologies
can provide packaging materials identical to the original materials. Refer to
Support
26
"Sales and Technical Support"
for the Keysight Technologies nearest to you.
on page 7. Keysight Technologies
Keysight 11713B/C Operating and Service Manual
Sales and Technical