Operating Guides; Installation; Initial Inspection; Mating Connectors - Keysight Technologies 8495D Operating And Service Manual

3

Operating Guides

Installation

Initial inspection

1 Inspect the shipping container for damage. If the shipping container or
2 If the contents are incomplete, if there is mechanical damage or defect, or if
3 If you are returning the instrument under warranty or for service, repackaging

Mating connectors

The APC 3.5 connector is a 3.5 mm air line connector that will mate with the SMA
type connectors. The SWR performance of this hybrid connection is similar to a
mated pair of SMA connectors when used within the frequency range of the SMA
connector.
Option
The attenuators are configured with the APC 3.5 female connectors and are
designated as Option 004.
28
cushioning material is damaged, it should be kept until the contents of the
shipment have been checked for completeness and the instrument has been
checked both mechanically and electrically.
– Check for mechanical damage such as scratches or dents.
– Procedures for checking electrical performance are given under
check" on page 30 or
the instrument does not pass the electrical performance test, contact the
nearest Keysight Technologies Sales and Service office. Refer to the Service
and Support information in the front matter of this manual. Keysight
Technologies will arrange for repair or replacement of the damaged or
defective equipment. Keep the shipping materials for the carrier's inspection.
the instrument requires original shipping containers and materials or their
equivalents. Keysight Technologies can provide packaging materials identical
to the original materials. Refer to Service and Support information in the front
matter of this manual for the Keysight Technologies nearest to you. Attach a
tag indicating the type of service required, return address, model number and
serial number. Mark the container FRAGILE to insure careful handling. In any
correspondence, refer to the instrument by model number and serial number.
"Performance tests"
Keysight 8495D/K Operating and Service Manual
on page 32.
"Operator's