Table of Contents
Advertisement
Walkera All Rights Reserved
6.2 Laser-assisted sight battery charging
Tip: This device has built-in 3.6V 2600mAh 18650 lithium battery. Please use the original charger for charging.
When charging, Positive battery docking charger positive, negative battery docking charger negative.
Do not reverse the positive and negative terminals of the battery.
1) Unscrew the auxiliary sight back cover counterclockwise to remove
the battery.
2) Align the negative pole of the battery with the negative slider of the
charger and snap the battery into the charger.
3) Connect the charger to the AC power supply (100~240V, 47~63 Hz).
4) The charger indicator turns green means charging full.
5) After charging is completed, the positive side of the battery faces
forward,the negative side towards the back cover and fitted back
into the laser-assisted sight.
7.0 WKDrone-ZHUN software interface introduction
In this interface, you can preview HD video and photos taken by ZHUN, and dynamically set parameters of aircraft,
remote control, gimbal and battery
1
Connected
23
22
21
20
19
D
15 m
18
1. Back: Back to last step.
2. Device connection status: Display Aircraft connected
or disconnected.
3. Flight time: Aircraft flight time.
2
3
03:58:45
GPS
14
15
3 m
4
5
H
H.S
17.1 m
0.0 m/s
17
4
5
6
AUTO Mode
18
5.00 m
V.S
P
R
0.0 m/s
0.0°
0.0°
Fig.7.0-1
24
4. The aircraft Mode: Displays aircraft's flight mode.
5. Numbers of aircraft satellite:
Display the received satellites of aircraft.
6. Positioning accuracy :
Display aircraft positioning accuracy.
ZHUN
Fig.6.3-1
7
8
9
10
2.4G
51.98V
98%
T
1X
W
GPS Ready
Y
0.0°
Quick Start Guide
Charging Indicator
11
12
13
14
15
16
11
Advertisement
Table of Contents
