Run The Wkdrone-Zhun Software; Gps Indicator; Motor Unlock/Lock - Walkera ZHUN Quick Start Manual

Hide thumbs Also See for ZHUN:
Table of Contents

Advertisement

Walkera All Rights Reserved
9 .2 Run WKDrone-ZHUN software
1. Click "WKDrone-ZHUN"
icon on touch screen.

9 .3 GPS Indicator

When green and red LED lights flash at the same time, GPS function work.
9 .4 Motor Unlock/ Lock
Motor Unlock
Note: be sure that the number of satellites is more than 12, the positioning accuracy is full, the horizontal and
vertical velocities speed are less than 0.2m / s, and the aircraft is placed horizontally.The roll and pitch angles
are less than 10 degrees. The heading icon arrow on the map interface points in the same direction as the
actual UA V head before the drone unclocking.
After the code matching is successful, place the left and right sticks in the lowest position at the same time and
toggle outward to hold for more than 2 seconds until the red and green LED lights are on, and then unlock the motor.
After unlocking, please release the sticks in time.
2. Click"Selection device";
Select"ZHUN-Test2";
Click "Go to Connect".
Green LED
Red LED
Fig.9.4-1
Voyager 4-4G-4K
Voyager 4-4G-4K
Red LED
Fig.9.3
ZHUN
Quick Start Guide
2.4G
Connected
03:58:45
AUTO Mode
GPS
18
5.00 m
14
15
3 m
4
5
D
H
H.S
V.S
P
R
15 m
17.1 m
0.0 m/s
0.0 m/s
0.0°
0.0°
3. Enter main interface.
Green LED
Fig.9.4-2
51.98V
98%
T
1X
W
GPS Ready
Y
0.0°
15

Advertisement

Table of Contents
loading

Table of Contents