Table of Contents
Advertisement
Walkera All Rights Reserved
GPS mode
Common
GPS
Manual
Turn the flight mode switch to the "GPS" position and the throttle stick to the center.
the aircraft will enter GPS mode.
Attention:
1) The first flight default to GPS Mode after each power on.
2) In the GPS mode, there are Altitude hold, fixed point, brake function, the flight speed is slower .
3) If the GPS signal is weak or no signal, can only be Altitude hold, but not fixed point.
4) Switch to manual mode can not be fixed point.
Motion mode
Common
GPS
Manual
Turn the flight mode switch to the "Common" position,
the aircraft will enter the Motion mode.
RETURN TO HOME
RTH
Power
Short press the RTH button and the aircraft will automatically return.
Horizontal distance between aircraft & Home point 30m
a. When the flight altitude is over RTH Height 25m, the aircraft will keep the current altitude and automatically fly back above the
Home Point, then descend vertically.
b. When the flight altitude is below RTH Height 25m, the aircraft will ascend vertically to 25m high, then automatically fly back
above the Home Point, and descend vertically.
Horizontal distance between aircraft & Home point 30m
a. When the flight altitude is over RTH Height 25m, the aircraft will keep the current altitude and automatically fly back above the
Home Point, then descend vertically.
b. When the flight altitude is below RTH Height 25m, the aircraft will keep the current altitude and automatically fly back above
the Home Point, then descend vertically.
Ground
Attention:
1) In the Motion mode, there are Altitude hold, fixed point,
brake function, the flight speed is faster.
2) If the GPS signal is poor or no signal, can only be Altitude hold,
but not fixed point.
3) Switch to manual mode can not be fixed point.
ZHUN
Quick Start Guide
Fig.10.0-3
17
Advertisement
Table of Contents
