Starting The Aircraft / Get Binding - Walkera ZHUN Quick Start Manual

Walkera All Rights Reserved
Install tablet
1. Press the button to release the clamp.
2. Place your mobile device and
adjust the clamp to secure.
3. Connect your mobile device with a USB cable.
Install mobile phone
Open the mobile phone block，and install the mobile
phone same way as tablet
Ensure that the aircraft is flying within the optimal transmission zone. To achieve the best
transmission performance, maintain the appropriate relationship between the operator and the aircraft.
10.0 Ready for Flight
Before you plan to fly, please download the map in the APP (turn off the aircraft power,
and connect internet, click the "A thumbnail map icon" to download the map).
Place the aircraft in an open outdoor area, with its tail facing the operator.

10.1 Starting the aircraft / Get binding

1
Press the head cover locks on the
front and rear of the aircraft first,
then remove the head cover.
4
Connect the positive plug of the
power supply, insert the two red
wires into the power port marked
with the positive mark, and then
reinstall the cover.
2
3
Turn on the remote controller.
5
Place aircraft at horizontal position, the
Red LED light flashing until goes out
indicates completion of IMU prewarming
& code-matching. (The red and green LED
lights alternatively flashing indicates
aircraft being abnormal, see also APP tips.)
ZHUN
Fig.9.0-3
3
Connect the negative power plug
and insert the two black wires into
the power port marked with the
negative polarity.
When installing the battery, make
sure the battery is fully charged;
When connecting to a power outlet,
you must first connect the black
wires to the red line;
When disconnecting the power outlet,
you must first break the red wires and
then break the black wires.
Quick Start Guide
Mobile
phone
block
Fig.9.0-4
13