Walkera ZHUN Quick Start Manual page 16

ZHUN
Quick Start Guide
GPS mode (Remote Controller Operation)
Switch to "GPS"position
Attention:
1) The first flight default to GPS Mode after each power on.
2) In the GPS mode, there are Altitude hold, fixed point, brake function, the flight speed is slower .
3) If the GPS signal is poor or no signal, can only be Altitude hold, but not fixed point.
4) Switch to manual mode can not be fixed point.
Motion mode (Remote Controller Operation)
Switch to "Common"
position
RETURN TO HOME (Remote Controller or APP Operation)
Long press this key(3-5 seconds)
on the remote controller and the
aircraft will return automatically
Horizontal distance between aircraft & Home point 30m
a. When the flight altitude is over RTH Height, the aircraft will keep the current altitude and automatically fly back above
the Home Point, then descend vertically.
b. When the flight altitude is below RTH Height, the aircraft will ascend vertically to 25m high, then automatically fly back
above the HP, and descend vertically.
Horizontal distance between aircraft & Home point 30m
a. When the flight altitude is over RTH Height, the aircraft will keep the current altitude and automatically fly back above
the Home Point, then descend vertically.
b. When the flight altitude is below RTH Height, the aircraft will keep the current altitude and automatically fly back above
the Home Point, then descend vertically.
16
Short press the Enter key to
enter the GPS mode
Short press the Enter key
to enter the Motion mode
Click this key in the APP
interface and the aircraft
will return automatically
Throttle stick
return neutral
Attention:
1) In the Motion mode, there are Altitude hold, fixed point, brake function,
the flight speed is faster.
2) If the GPS signal is poor or no signal, can only be Altitude hold,
but not fixed point.
3) Switch to manual mode can not be fixed point.
Walkera All Rights Reserved
Ground
Fig.11.0-3