Teldat C+ Series Manual page 18

1 Installing the Router
Boot-stack used: 0x00000C38
Boot-stack free: 0x000013C8
====================================================================
BIOS TELDAT
====================================================================
BIOS CODE VERSION: 01.06
CLK=262144 KHz
Date: 01/12/06, Thursday
SDRAM size: 32 Megabytes
BANK 0: 32 Megabytes (detected)
Caches: ON
FLASH: 64 Mb.
NVRAM: 128 Kb.
EEPROM: 2048 Bytes.
DPRAM: 8192 Bytes.
ADSL2+
ISAC
RDSI_B
RDSI_B
SWITCH 10/100
SECURITY ENGINE
PCI device: Host bridge
(Bus: 0, Device: 0, Function: 0)
(Subs. Vendor: 0x0000, Subs. Device: 0x0000)
Current production date: 00 00
Current software license: 12 15
Current serial number: 550/05646
BIOS MAC Add: 00-a0-26-a0-16-0e
>>
........
TRYING APP CODE DUMP
(CONFIGURED) ATLAS2G.BIN ver.: 0.10.6.12 0.0.0.0 ............................
................................................................................
................................................................................
................................................................................
................................................................................
.............................
APP DATA DUMP...........................................................
Bios-stack used: 0x1490
Bios-stack free: 0x2B70
Aux-stack used: 0x124
Aux-stack free: 0x1EDC
Running application
[Default configuration used | Empty configuration used]
Parsing text mode configuration ...
Configuration parsed
Initializing
Press any key to get started
At this point, return microswitch 5 to the OFF position (you don't need to turn off the device). The next time you re-
start the device, the saved configuration will run.
14
BUSCLK=65536 KHz PCICLK=65536 KHz
Time: 12:40:13
Write-Back
(c)Teldat
L0
Teldat S.A.
Teldat C+ Router Family